1)Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
3)Digital Video Recorder through USB (external flash or hard drive are not included)
4)The most affordable FTA HD receiver on the market today.
6)Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
DVB-S2 |
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75|?
LNB Power: Auto/14v/18v/OFF, Imax = 500mA |
Video decoder |
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device |
Audio decoder |
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz |
Output digital |
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink |
Video parameter |
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard |
TV-Scart |
Output: FBAS, RGB, S-Video |
Serielle Interface RS 232 |
Typ RS232 bidirectional
Bit rate 115, 2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware |
Ethernet |
10/100 MBit compatible interface
Function: Update of Firmware |
USB |
1 x USB 2.0 Host ,PVR |
LNB power and polarisation per tuner |
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA |
Count of active satellite position |
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control |
External PSU |
Input:110-240V AC / 50-60Hz / 0,6A
Output: 12V = / 3,0A |
Physical specification |
Ambient Temperature +15 ˇăC...+35 ˇăC
Humidity < 80%
Size (W x D x H): 300 mm x 220 mm x 56 mm
Weight: 1,8 kg? without HDD |
Power |
AC input range: 100-240VAC 50/60Hz
Power Consumption (Standby): Max. 10W (<1 W)? |
